White Rodgers 1F85-275 Installation Instructions Manual page 9

the weekday 1st period heating 1st period heating 1st period heating 1st period heating start time and temperature and 1st period heating
also choose 7:00 AM and 76° as the weekday 1st period
cooling cooling cooling start time and temperature). cooling cooling
Use the table to plan your program time periods and the
temperatures you want during each period. Fill in the complete
table to have a record of your programs.
SAMPLE
Heating/Cooling Schedule Plan (Factory Program)
ALL DAYS OF THE WEEK
Start Time
Period
1ST 6:00 AM
2ND 8:00 AM
3RD 5:00 PM
4TH 10:00 PM
1ST 6:00 AM
2ND 8:00 AM
3RD 5:00 PM
4TH 10:00 PM
Heating/Cooling Schedule Plan
WEEKDAYS
(5 Day)
Start
Period
Time Temp
1ST
2ND
3RD
4TH
1ST
2ND
3RD
4TH
Entering Your Program Entering Your Program Entering Your Program
Entering Your Program Entering Your Program
Set Current Time and Day Set Current Time and Day Set Current Time and Day Set Current Time and Day Set Current Time and Day
1. Press TIME button once. The display will show the hour
only.
EXAMPLE:
2. Press and hold either
correct hour and AM/PM designation (AM
night; PM PM PM PM begins at noon).
PM
3. Press TIME once again. The display window will show
the minutes only.
EXAMPLE:
4. Press and hold either
correct minutes.
1st period 1st period 1st period 1st period
Temperature
70 F
62 F
70 F
62 F
78 F
85 F
78 F
82 F
SATURDAY SUNDAY
(1 Day) (1 Day)
Start Start
Time Temp Time
PM
or until you reach the
AM AM
AM AM begins at mid-
or until you reach the
5. Press TIME once again. The display will show the day of
the week.
6. Press or
week.
7. Press RUN once. The display will show the correct time
and room temperature alternately.
Enter Heating Program Enter Heating Program Enter Heating Program
Enter Heating Program Enter Heating Program
1. Move the SYSTEM switch to HEAT.
2. Press PRGM once. "MO TU WE TH FR" (indicating
weekday program) will appear in the display. Also dis-
played are the currently programmed start time for the 1st
heating period and the currently programmed tempera-
ture (flashing).
MO TU WE TH FR
EXAMPLE:
This display window shows that for the 1st weekday
period, the start time is 6:00 AM, and 70° is the
programmed temperature (this example reflects factory
preprogramming).
3. Press or
to your selected temperature for Monday's 1st heating
program period.
4. Press TIME once (the programmed time will flash). Press
Temp
or until your selected start time appears. The time
will change in 15-minute increments. When your selected
time is displayed, press TIME again to return to the
change temperature mode.
5. Press PRGM once. The currently programmed start
time and setpoint temperature for the 2nd heating pro-
gram period will appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods. Weekday heating programs are now
complete.
8. Press PRGM once "SA" (indicating Saturday program)
will appear in the display, along with the start time for the
1st heating period and the currently programmed temp-
erature.
9. Repeat steps 3 through 7 to complete Saturday heating
programming.
10.Press PRGM once to change to "SU" (Sunday) heating
programming and repeat steps 3 through 7 to complete
Sunday programming.
11.When you have completed entering your heating pro-
gram, press RUN.
OPERA OPERA
OPERATION OPERA OPERA
until you reach the current day of the
AM
to change the displayed temperature
TION TION
TION TION
9