La Crosse Technology 328-47577 Setup Manual page 6

BASICS
Positioning the Breeze Pro Sensor
For Accurate Measurements
• Mount the Breeze Pro Sensor horizontally and ensure it's level.
• The sensor should be mounted with the wind cups on top.
• Your Breeze Pro Sensor should be the tallest object in the area to
avoid reduced wind speed values.
• To optimize the use of the Breeze Pro Sensor's Solar Panel, battery
life, and wind direction readings, ensure that the sensor is mounted
with the solar panel facing directly to the South.
• Make sure all the screws on the mounting bracket, wind cups, wind
vane, and battery compartment are securely fastened.
• Ensure the knob on the mounting bracket is secure and stays in
your desired configuration.
Avoid areas that may obstruct The Breeze Pro Sensor should
wind gusts such as eaves, be the tallest object in the area.
rooflines, or trees. An unobstructed rooftop is an
ideal location.
For additional sensor information, visit:
The illustrations above are not to scale and are for informative purposes only.
The sensor may be mounted on
a pole away from any objects that
may cause inaccurate readings.
www.lacrossetechnology.com/support
BASICS
Positioning the Rain Sensor
Viewing 24 Hour Rain Data
• Your 24 Hour Rain Reading is shown in the Extra Sensor area.
• Press the EXTRA button to cycle through the Pressure, Rain, or Extra Sensor data displayed on the LCD.
• The Auto Scroll Icon indicates when the display will automatically switch between extra sensor
readings.
09
For Accurate Measurements
• Mount the Rain Sensor horizontally and ensure it's level.
• The sensor should be mounted more than 3 feet above ground.
• Your Rain sensor needs to be in an open area for accurate readings.
• Make sure the base of your Rain Sensor is not in a depression.
• This Rain Sensor has drainage holes in the bottom to allow it to
self-empty.
• View sensor mounting video at: bit.ly/Rain_SensorMounting
Rain Data Example
Pressure Reading
10