Burkert 2610 Operating Instructions Manual
2/2 way valve
Hide thumbs
Also See for 2610:
- Operating instructions manual (22 pages) ,
- Operating instructions manual (13 pages)
Related Manuals for Burkert 2610
Summary of Contents for Burkert 2610
- Page 1 Type 2610, 2612, 2620 2/2-way valve 2/2-Wege-Ventil Vanne 2/2 voies Operating Instructions Type 2610 Bedienungsanleitung Manuel d‘utilisation...
-
Page 2: Intended Use
▶ Operating instructions must be available to each user. the environment. ▶ The liability and warranty for the Type 2610, Type 2612 and The device is designed for blocking, dosing, filling and venting Type 2620 are void if the operating instructions are not followed. -
Page 3: Basic Safety Instructions
2.2 Insulation Risk of electric shock. ▶ Before reaching into the system, switch off the power supply Type 2610, 2620: and secure to prevent reactivation. Observe applicable accident The device must not be insulated more prevention and safety regulations for electrical equipment. -
Page 4: Technical Data
▶ Installation and repair work may be carried out by authorized technicians only and with the appropriate tools. Type 2610 conforms with the EU Directives according to the EU ▶ After an interruption in the power supply or pneumatic supply, Declaration of Conformity (if applicable). -
Page 5: Fluidic Data
Type 2612, 2620 max. +90 °C Circuit function (CF) Type 2610 max. +55 °C with attached pilot valve 2 (A) Circuit function 2/2-way valve, 1 (P) nor- Degree of protection mally closed Type 2610 with cable plug: IP65 in accordance with EN... -
Page 6: Mechanical Data
4.5 Mechanical data Type 2612 Port connections Type 2610, 2620 G1/4, G1/2 Type 2612 Flange Materials Body: Designation MS Body: brass, seat: 1.4305 (G1/4) Operating Body: brass, seat: brass (G1/2) pressure Designation VA Body and seat: 1.4410 Actuator Type 2610, 2620... - Page 7 Type 2612 Type 2620 ∅ 3,7 ∅ 6,3 SW27 74,5 english...
-
Page 8: Type Label (Example)
4.6 Electrical data (only Type 2610) 4.7 Type label (example) Connections DIN EN 175301-803 Form A: Orifice Seal material for cable plug Type 2511 Circuit function Body material Type Operating voltage see type label 2610 A 6,0 PTFE Voltage tolerance ±... -
Page 9: Fluid Installation
Risk of injury due to electrical shock. the direction of flow. ▶ Before reaching into the device or the equipment, switch off the power supply and secure to prevent reactivation. Type 2610 ▶ Observe applicable accident prevention and safety regulations Type 2620 for electrical equipment. - Page 10 5.2 Electric installation (only Type 2610) Flanged connection: WARNING! WARNING! Risk of injury from escaping medium. Risk of injury due to electrical shock. ▶ Leaking connections if seals not seated properly, if manifold ▶ Before reaching into the system, switch off the power supply uneven or if surface quality of the manifold inadequate.
-
Page 11: Maintenance & Troubleshooting
5.3 Rotation of the coil (only Type 2610) MAINTENANCE, TROUBLESHOOTING WARNING! WARNING! Risk of injury due to electrical shock. Risk of injury from improper maintenance. ▶ Maintenance may be carried out by authorized technicians only If the protective conductor contact between the coil and body is and with the appropriate tools. -
Page 12: Transport, Storage, Disposal
▶ Observe applicable regulations on disposal and the → environment. Switch off the power supply. → Loosen the cable plug (only Type 2610). → Hold the device with the open-end wrench on the body and screw off the pipeline. english... - Page 13 Fax + 49 (0) 7940 - 10 91 448 E-mail: info@de.buerkert.com International address www.burkert.com Manuals and data sheets on the Internet: www.burkert.com Bedienungsanleitungen und Datenblätter im Internet: www.buerkert.de Instructions de service et fiches techniques sur Internet : www.buerkert.fr © Bürkert Werke GmbH, 2015 Operating Instructions 1603/05_EU-ML_00804016 / Original DE www.burkert.com...
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers