Bosch UniversalInspect WEU Original Instructions Manual page 25

OBJ_BUCH-3040-001.book Page 25 Monday, February 6, 2017 8:23 AM
Troubleshooting – Causes and Corrective Measures
Cause
Error indication on display
A micro SD card with an unsuit-
able memory size has been in-
serted.
An incorrectly formatted micro
SD card has been inserted.
A damaged micro SD card has
been inserted.
The micro SD card cannot be
read.
There is no more available
memory space on the micro SD
card.
Other displays
Cause
A micro SD card has been in-
serted into the inspection cam-
era while switched on.
The inspection camera has
been switched on with a micro
SD card inserted.
The memory is empty.
Confirmation of the deletion
process.
The shutter release has been
actuated.
Image has been rotated through
180°.
Bosch Power Tools
English | 25
Remedy
Insert a micro SD card between
4 GB and 32 GB.
Format the micro SD card in
FAT32 format and then reinsert
it.
Insert an undamaged micro SD
Card.
Inspect the micro SD card and
replace it if necessary.
Delete some images.
Effect
Images are being transferred to
the micro SD card and deleted
from the inspection camera
memory.
Data is being read.
No images are available.
Image is being deleted.
Confirms the image.
Confirms the rotation.
1 609 92A 3HR | (6.2.17)