Bosch UniversalInspect WEU Original Instructions Manual page 23

OBJ_BUCH-3040-001.book Page 23 Monday, February 6, 2017 8:23 AM
English | 23
Photo mode
After being switched on, the inspection camera is in photo mode 13.
To switch from gallery mode to photo mode 13, press the 2 button. Pressing the 2
button again actuates the shutter release.
A maximum of 8 images can be saved to the inspection camera's local memory. Every
further image that is taken deletes the oldest image in the local memory.
If more than 8 images are to be saved, a micro SD card (4 GB...32 GB) must be insert-
ed into the slot 18. When a micro SD card in FAT32 format is inserted, all images are
automatically transferred from the local memory to the micro SD card and deleted
from the local memory. All further images are saved on the micro SD card.
All images are automatically saved in the "Bosch" folder.
Note: All images are saved in their original state, i.e. without magnification or rota-
tion.
Note: If an image was taken with black and white contrast, it cannot be called up in
colour.
Gallery mode
Pressing the 1 button opens gallery mode 14.
The 6 and 5 buttons can be used to scroll backwards or forwards through the images
you have taken.
Briefly pressing the on/off button 4 shows the h and i symbols on the display. Press-
ing the 5 button deletes the image. Pressing the 6 button stops the deletion process.
Briefly pressing the on/off button 4 reactivates gallery mode 14.
Pressing the 1 or 2 button switches to photo mode 13.
Status Bar
The status bar b is shown on the display for approx. 3 seconds each time a button is
pressed. It shows:
– Photo mode a (brightness/black and white contrast) or gallery mode e
– The selected magnification c
– The state of charge of the batteries d
Setting the brightness and the black and white contrast in the camera head
Switching the camera on also switches on the illumination light 11 in the camera
head. The set brightness is 50 %.
To brighten the camera image, you can adjust the brightness or the black and white
contrast. This adjustment can be set to one of four levels (100 %, black and white con-
trast, 0 %, 50 %).
Bosch Power Tools 1 609 92A 3HR | (6.2.17)