Page 1
STIHL GH 370 S Gebrauchsanleitung Instrucţiuni de utilizare Instruction manual Οδηγίες χρήσης Manuel d’utilisation Инструкция по эксплуатации Gebruiksaanwijzing Инструкция за експлоатация Istruzioni per l'uso Посібник з експлуатації Manual de instrucciones Kasutusjuhend Manual de utilização Пайдаланушының нұсқаулығы Bruksanvisning Bruksanvisning Käyttöopas Betjeningsvejledning Instrukcja obsługi...
Dear Customer, What material cannot be processed? Thank you for choosing STIHL. We 1. Table of contents develop and manufacture our quality Maximum branch diameter products to meet our customers' Feeding the garden shredder Notes on the instruction manual requirements. The products are designed...
EC Directive 2006/42/EC. Designation of text passages: passages in the instruction manual. STIHL is continually striving to further The instructions described can be develop its range of products; we therefore identified as in the following examples.
Caution – risk of accident! screw on the fuel tank and canister caps from the vendor or another expert. STIHL garden shredders are suitable for properly and tightly. Defective caps must During this instruction, the user should be shredding branch material and plant be replaced for safety reasons.
If it is necessary to drain the tank, this must empty fuel tank. signs and warnings on the machine. Your be done out of doors. STIHL specialist has a supply of Only transport the machine with the feed replacement stickers and all the other chute properly fitted spare parts.
– that the housing and cutting tools during working in order to prevent slipping. Exercise care when starting the machine (blades, blade shaft, blade discs, etc.) If possible, avoid using the machine when and observe the instructions contained in are not worn or damaged the ground is damp.
(blade, blade disc, blade topping up engine oil or performing engine garden shredder with branch material. fastening screw) for damage and have oil changes to a STIHL specialist dealer. Wear gloves. any necessary repairs carried out by a Cleaning:...
Genuine STIHL spare parts Consult your recycling centre or your can be recognised by the STIHL spare specialist dealer for information on the parts number, by the STIHL lettering and, proper disposal of waste products. STIHL if present, by the STIHL spare parts 4.8 Storage for prolonged periods...
Risk of injury from the blades. Wear hearing protection. Item Designation Qty. Always store an old garden shredder in a Torx screw Wear safety glasses. safe place prior to scrapping. Ensure that P5x50 the machine and particularly all the blades Wear work gloves.
● Remove screw (O), retaining washer (P), deflector (T), upper 7.2 Installing wheels and chassis 7.4 Opening and closing the spacing ring (U) and blade disc (I). discharge flap ● Attach left and right wheels (G) with wheel pin (R), washer (L1), Opening the discharge flap: washer (L2) and nut (K1) to ●...
Maximum branch diameter GH 370 S: 45 mm 8.1 Working area for operator 9. Safety devices ● For safety reasons, the operator must stay within the working area 8.5 Feeding the garden shredder...
Before each use deposits with a brush, a damp time. cloth or a stick, STIHL To achieve a long service life, it is always recommends the use of a particularly important to maintain a special cleaner (e.g. STIHL special sufficient level of oil and to change the oil 10.3 Shredding...
Maintenance interval: operation, the blades should only be belt wear, excessive tensioning Before each use sharpened by a technician. STIHL may lead to bearing damage. recommends STIHL specialist dealers. If you do not have the necessary ● Remove the feed chute. ( 7.8)
● Thoroughly clean all external parts of petrol garden shredder (STIHL GH) pushed slowly (walking pace). the machine. STIHL assumes no liability for material or ● Thoroughly lubricate/grease all moving personal damage caused by the non- parts. observance of information contained in the ●...
Please always observe the following 3. Maintenance operations important information for the prevention of All operations listed in the section 15. Environmental protection damage or excessive wear to your STIHL "Maintenance" must be performed machine: regularly. Shredding material should be 1.
– Oil level in engine too low – Surface of engine covered with Please hand this instruction manual Possible cause: shredded material to your STIHL specialist dealer in – Faulty blade disc or blades the case of maintenance operations. – Loose engine mounting Remedy: He will confirm the service operations –...
Need help?
Do you have a question about the GH 370 S and is the answer not in the manual?
Questions and answers