Performax 241-0991 Operator's Manual page 7

3. Before plugging the tool in, check that
the trigger switch is in the "OFF" position.
Accidental start-ups could cause injury.
4. Keep hands away from cutting area. Do
not reach under the material being cut. The
proximity of the blade to your hand is hidden
from your sight.
5. Always wear safety goggles or eye
protection when using this tool. Use a dust
mask or respirator for applications that
generate dust.
6. Wear ear protection. Exposure to noise
can cause hearing loss.
7. When removing the blade from the tool,
avoid contact with skin and use proper
protective gloves when grasping the blade
or accessory. Accessories may be hot after
prolonged use.
DANGER:
People with electronic
devices, such as pacemakers, should
consult their physician(s) before using this
product. Operation of electrical equipment
in close proximity to a heart pacemaker
could cause interference or failure of the
pacemaker.
SAFETY INSTRUCTIONS
WARNING:
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to the state of California
to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement and other masonry products,
and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemical: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
Some dust created by
Page 6