Camera Set -Up - JVC GY-HM100U Manual

Omni Microphone & Mic Cable – used when the camera's built-in microphone
would produce unacceptable or less than desirable audio results, particularly in
commentary type or interview situations.
White Balance Card – used to calibrate the camera for correct and consistent color,
under those conditions.

Camera Set -Up

1)
Mount the camcorder to the tripod as described earlier. (pg. 8-13)
Attach a battery to the camcorder or attach the AC Adapter to the camcorder's DC
2)
terminal and connect the power cord and plug it into the nearest outlet.
3)
Turn the camcorder on.
4)
Open the SD card slot door.
5)
Insert a SD card (A/B).
6)
Close the SD card slot door.
7)
Open the lens cap.
8)
Adjust the viewfinder or LCD screen so you can comfortably see your camera
shots.
9)
Point the camcorder at the subject.
10)
Check the image and, if necessary, adjust focus, white balance, iris, shutter, gain.
11)
Put on the headphones and check the audio.
12)
If necessary, practice your camera shots.
Omni microphone, mic cable, and white balance card.
24