JVC GY-HM100U Manual page 18

Front View
1. Tally Lamp. When this is set to on the tally lamp lights up in the recording mode
3. Remote camera sensor. Used with the camera remote
4. Auto White Balance Button. Used for adjusting the white balance
5. Lens/Lens Cover. When the camcorder is not in use, close the lens cover to protect the lens
Top View
6. Shoe. For mounting separately sold accessories
7. Eyepiece Focus Lever. A lever for adjusting visibility. Found on the underside of the eyepiece
8. Eyepiece.
9. Viewfinder. You can monitor video images on the camcorder using the viewfinder.
10. Snapshot Button. Used for starting the recording of still images
11. Zoom Lever. Used for zooming to the Tele (T) or wide (W) end of the lens
12. Microphone Holder. Used for mounting an external microphone
13. Knob. Used for locking the microphone into place
14. External Microphone
15