JVC GY-HM100U Manual page 15

6)
Check that the legs, the pan lever lock, the tilt wheel lock and the pedestal crank
are locked.
Tripod pan and tilt locks, pedestal crank and lock.
Pan and tilt also have friction knobs
7)
Remove the mounting plate from the tripod.
8)
Attach the mounting plate to the camera. Make sure you properly aligned the
mounting hole on the camera with the screw on the mounting plate.
Test the mounting plate to make sure you've securely attached the camera before
9)
proceeding with anything else.
10)
Double check the pan and tilt locks on the tripod to be sure they are locked.
11)
Slide one edge of the mounting plate over the red safety tab and into the edges of
the plate shoe.
12)
Align the plate and secure it with the mounting plate lock.
13)
Visually check to be sure the plate is correctly seated in the shoe.
14)
If necessary, loosen the pedestal lock and adjust the camera height.
Tripod mounting plate.
12