Field Production Step-By-Step - JVC GY-HM100U Manual

Field Production Step-By-Step

Here is a list of the basic steps involved in producing a program utilizing the CTN equipment:
1)
Plan your (pre) production. Decide on the who, what, where, why, when and
how.
2)
Fill out and submit a CTN Production Proposal Form.
3)
Decide when you want to begin your production work.
4)
Fill out and submit a CTN Equipment Reservation Form.
5)
Call CTN the next day (at the earliest) to see if your reservation was approved.
6)
If necessary, arrange for crew. Get a list of certified volunteers from CTN.
7)
Scout the location where you will be doing your production.
8)
On the day of your reservation, arrive at CTN on time. During the equipment
check-out:
Check that you're getting everything you asked for.
9)
10)
Set up and test any equipment you have not used before.
11)
Ask questions about the equipment or your production.
12)
Confirm the day and time you are expected to return the equipment.
13)
Arrive at your production location early and get set up.
14)
Rehearse everything that can be rehearsed.
15)
Record your production.
When you're done with recording, teardown the set and equipment.
16)
17)
Return the equipment to CTN on time. During check-in:
18)
You are required to set up the equipment.
19)
Notify staff of any equipment malfunctions, is broken or is missing pieces.
20)
Notify staff of any problems you had during your production.
21)
If more production work is necessary, go back to step 4.
22)
If necessary, make arrangements to edit your production.
23)
When your production work is done, submit your finished program for playback.
24)
Begin planning your next production.
2