Initializing The Data Logger; Figure 17 - Reader Id Input; Figure 18 - Hhu Time Confirmation - Neptune Technology ProCoder R900i Installation And Maintenance Manual

4. Type your reader ID and password (if applicable) for the host software, and then
click LOGIN.

Initializing the Data Logger

1. Verify the time is correct, and then click YES.
Synchronize the HHU prior to data logging to set the clock.
The Initialize screen appears if you are not connected or you are not in range of your
R900 BCT.
ProCoder™)R900 ™ Installation and Maintenance Guide
i
Figure 17 – Reader ID Input
Figure 18 – HHU Time Confirmation
Chapter 5: Data Logging Extraction
21