Chapter 4: Installing the ProCoder™)R900i™
Connecting the ProCoder™)R900i ™ Through-the-Lid Antenna
When ordering an external antenna for the ProCoder)R900i unit, Neptune
recommends at least a 6-foot cable to allow for easy removal of the pit lid when
necessary.
Installing the Antenna
To install the antenna, complete the following steps.
1. Insert the antenna cable and housing through the 1¾-inch hole in the meter pit lid.
14
Figure 6 – ProCoder™)R900i™ Antenna
Figure 7 – Through-the-Lid Antenna
ProCoder™)R900
Installation and Maintenance Guide
i™