Fantasia Kompact Owner's Instruction Manual page 7

2-1 Flush mount assembly
Release 3 screws from upper housing, put the canopy onto the drop rod boss of the fan. Using the 3
upper housing screws to screw the canopy tight Please refer to the pictures .
3. Attaching the blades
Attach the blade to the blade holder using the three blade
set screws and fiber washers. Start a screw with fiber
washer into the blade holder, but do not tighten. Repeat
for the two remaining blade set screws and fiber washers.
Tighten each screw securely starting with the center
screw. Make sure the blade is straight. Repeat these steps
for the remaining blades.
Align the holes from the blade holder to the holes from the
motor, and secure the blade holder in place with screws
and washers provided. Repeat this process to attach the
other blades assemblies.