Maintenance - Panasonic DVD-S35S Operating Instructions Manual

Picture
The SETUP menus and other
screens shown on the television
are displayed incorrectly.
Colors appear faded.
Sound
No sound.
Distorted sound.
Piercing noise comes from the
speakers.
Effects do not work.
Unit displays
"NoPLAY"
"CHECK DISC"
"H∑∑"
∑∑ stands for a number.
"NoDISC"
Television displays
"Cannot display group xx, picture
xx"
"The progressive out is set to
"Disable""
No on-screen display or only
partially displayed.
The disc's menu is displayed in a
different language.

Maintenance

Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide
patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000
Digital Theater Systems, Inc. All rights reserved.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
≥The unit and television are using different video systems.
[Units\for\the\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]
Use a multi-system or PAL television.
[Units\for\other\areas]
Use a multi-system or NTSC television.
≥Check the connections.
≥Check the volume on the equipment you have connected.
≥Ensure that the input settings on the other equipment are correct.
≥Turn Advanced Surround off if it causes distortion.
≥Output from this unit will be in stereo (two channels) when Advanced Surround is on. Turn Advanced
Surround off if you are using three or more speakers.
≥Press [1] (PLAY) to restore normal play after changing the speed.
≥Noise may occur when playing WMA files.
≥If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,
ensure you have selected the correct settings for "Dolby Digital", "DTS Digital Surround" and
§
"MPEG " in the SETUP menus' Audio menu.
§
For the Middle East, South Africa, Russia, Australia and N.Z.
≥Dialogue Enhancer and Advanced Surround do not work when the unit is outputting bitstream
signals.
≥Advanced Surround does not work if you have changed the play speed.
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank DVD-RAM.
≥Disc is dirty: Wipe it clean.
≥Trouble may have occurred. The number following "H" depends on the status of the unit.
Reset procedure:
Press [POWER Í/I] to switch the unit to the standby mode and then back to ON. Alternatively, press
[POWER Í/I] to switch the unit to the standby mode, disconnect the AC power supply cord, and then
reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
≥You haven't inserted a disc: Insert one.
≥You haven't inserted the disc correctly: Insert it correctly.
≥You are trying to display incompatible pictures.
≥Go to Video in the SETUP menus, and select "Enable" in "Progressive Out (Component)".
≥Go to Display in the SETUP menus, and select "On" for "On-Screen Messages".
≥Press [DISPLAY], and press [2, 1] to highlight the Bar Position icon, then press [3, 4] to adjust the
position.
≥Go to Disc in the SETUP menus, and select the preferred language for "Menus".
Page
–
4, 5
–
–
15
15
16
–
19
–
16
6
–
6
–
–
–
8
11
18
18
16
18
21