Table of Contents
Advertisement
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
• • • • Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
• • • • Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
• • • • This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATURES
• • • • Detailed maps are used.
• • • • Desired places can be registered.
• • • • Notes
DVD audio and video are not supported by this unit.
This unit does not support all Video CD and CD formats.
3 REPLACING THE FUSE
Use fuses of the same specified rating (5A, 3A). Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
4 MAINTENANCE
Your products is designed and manufactured to ensure a
minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvents.
5 NOTES
[DVD DECK BLOCK]
This
model
has
no
microcomputer controls the servo circuit
6 DIMENSIONS
7 LASER PRODUCTS
3
servo
alignment
points
because
CN-D105H
Advertisement
Table of Contents
