Saw Head Dismantling - Husqvarna 327 PT5S Workshop Manual

Saw head
Dismantling
Dismantle the bar and chain.
Remove the saw head from the telescopic
tube.
Remove the drive wheel and the plastic
cover (F).
Remove the screws holding the oil tank in
place.
Carefully remove the oil tank.
Saw head
Dismantling
Dismantle the saw head from the
telescopic tube.
1. Remove the nut (A) and lift off the
cover (B), and chain and bar.
2. Loosen the screw (C).
3. Unscrew the locating screw (D) as far
as required to be able to twist the saw
head and detach it from the telescopic
tube.
4. Remove the nut and washer holding the
flywheel in place.
5. Remove the drive wheel.
6. Remove the screw (E) and pry off the
plastic cover (F) using a screwdriver.
7. Remove the three screws holding the oil
tank in place.
8. Carefully lift off the oil tank straight up
from the oil pump to prevent the oil
screen (G) from sliding off the hose and
falling into the tank.
3