Related Manuals for Siemens WU P Series
Summary of Contents for Siemens WU P Series
- Page 1 Washing machine WU..P.. siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Faults and what to do about Intended use them ..... 33 Emergency release ... . . 33 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The mains voltage on your Warning ■ power socket must match Risk of poisoning! the rated voltage specified Detergents and care products on the appliance may result in poisoning if (identification plate). The consumed. connected loads and the If accidentally swallowed, seek required fuse protection are medical advice. - Page 7 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
-
Page 8: Operation
Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the... -
Page 9: Cleaning/Maintenance
Safety instructions with detergents or care Warning products. If accidentally Risk of injury! swallowed, seek medical If you support your weight/sit ■ advice. on the appliance door when it is open, the appliance may Caution! tip over, which may result in Material damage/damage to injury. - Page 10 Safety instructions Switch off the appliance. Do not use a pressure washer, ■ Disconnect the appliance steam cleaner, hose or spray from the power supply (pull gun to clean your appliance. out the plug). Warning Never take hold of the mains ■...
-
Page 11: Environmental Protection
Environmental protection Tips on economical use Environmental protection Always fill the appliance with the ■ maximum amount of laundry for each programme. P ackaging/used appliance E n v i r o n m e n t a l p r o t e c t i o n Wash normally soiled laundry Dispose of packaging in an ■... -
Page 12: Positioning And Connecting
Positioning and connecting Mains cable Positioning and Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Warranty ■ P o s i t i o n i n g a n d c o n n e c t i n g Supplementary sheet for the ■... -
Page 13: Installation
Positioning and connecting Installation Installation surface Humidity in the drum is caused The appliance must be stable Note: Note: by the final inspection. aligned so that it does not move around. The installation surface must be firm Safety instructions ■ and level. -
Page 14: Installation On A Platform With Drawer
Positioning and connecting Installation on a platform with To prevent transport damage from ■ occurring if the appliance is moved drawer at a later date, you must refit the transport locks before transporting Platform order no.: WMZ20490 the appliance. WZ20490 WZ20510 WZ20250. Keep the screws and sleeves in Note: Installing the appliance in a... -
Page 15: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Do not connect the appliance to the ■ mixer tap of an unpressurised hot- water boiler. Left-hand connection ■ Do not use a used supply hose. Only ■ use the supply hose supplied or one that was purchased from an authorised specialist retailer. -
Page 16: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 17: Alignment
Positioning and connecting Alignment The mains voltage must be the same ■ as the voltage specifications on the Level the appliance using a spirit level. washer dryer (appliance rating plate). Incorrect levelling may result in intense The connected load and the required noise, vibrations and "wandering". -
Page 18: Before Washing For The First Time
Positioning and connecting Before washing for the first Drain any residual water. ~ Page 31 time Disconnect the appliance from the mains. The appliance was inspected Remove the hoses. thoroughly before leaving the factory. To Empty the dispensers. remove any residual test water, run the ~ "Detergent drawer and housing"... -
Page 19: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e 9S Open the door Detergent dispenser 9T Close the door Control panel... -
Page 20: Control Panel
Getting to know the appliance Control panel You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. 8 Start/Reload button for starting, ( Programme default settings can interrupting, (e.g. adding laundry) be changed. -
Page 21: Display Symbols
Getting to know the appliance Display symbols Programme progress symbols ¼ Washing: On if the washing cycle is running. ½ Rinse: On if the rinse cycle is running. 0 Spin/Drain: On if the spin or drain cycle is active. Programme information symbols 90°C, 0 1200, 9.0kg*: Temperature, spin speed, max. -
Page 22: Laundry
Laundry Brush sand out of pockets and ■ Laundry collars. Remove curtain fittings or include in ■ P rotecting your laundry and the net/bag. L a u n d r y appliance Sorting laundry Caution! Damage to the appliance/textiles Sort your laundry according to the care instructions and manufacturer's Foreign objects (e.g. -
Page 23: Programme Default Settings
Programme default settings û Finish in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in hourly increments (h ° C Temp. = hour) up to a maximum of 24 hours. P r o g r a m m e d e f a u l t s e t t i n g s Depending on what stage the To do this: programme is in, you can change the... -
Page 24: Additional Programme
Additional programme settings æ Easy Iron Additional programme Reduces creasing thanks to a special settings spin sequence followed by fluffing and reduced spin speed. You can find possible Note: A d d i t i o n a l p r o g r a m m e s e t t i n g s programme additional settings in the The washing's residual moisture Note:... -
Page 25: Operating The Appliance
Operating the appliance Select programme/switch on Operating the the appliance appliance If you have activated the Note: P reparing the appliance childproof lock, you must first deactivate O p e r a t i n g t h e a p p l i a n c e it before you can set a programme. -
Page 26: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent Dispenser I Clothing disinfectant. and care products (Disinfectant additional programme setting or Caution! Disinfectant programme is selected Damage to the appliance! only.) Detergents and agents for the pretreatment of laundry (e.g. stain Dispenser i Softener. -
Page 27: Start The Programme
Operating the appliance Start the programme Touch and hold the rpm 0 and Finish in û buttons until the symbol w Press the A button. The indicator lamp disappears. lights up and the program starts. The display panel shows the Finish in Adding/removing laundry time while the program is running or the program duration and the program... -
Page 28: Cancel The Programme
Operating the appliance Cancel the programme After washing For programmes at high temperatures: Set programme selector to $ Off. Open appliance door and remove Touch the A Start/Reload button. laundry. To cool down laundry: Select Rinse. Not required for Aqua-Stop Note: Touch the A Start/Reload button. -
Page 29: Appliance Settings
Appliance settings Changing the volume and drum care Appliance settings information Use the Finish in û button to change Y ou can change the following settings: the following settings at the A p p l i a n c e s e t t i n g s The volume of the end signal. -
Page 30: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and Use chlorine-free cleaning agents, do maintenance not use steel wool. If there are odours in the appliance, or Warning C l e a n i n g a n d m a i n t e n a n c e to clean the drum, run the Drum clean Risk of death! programme without laundry. -
Page 31: Cleaning The Measuring Aid A For Liquid Detergent
Cleaning and maintenance Cleaning the measuring aid A Allow the water to cool down. for liquid detergent Switch off the appliance. Pull out the mains plug. If it contains liquid detergent residue: Open the service flap. Hold the mearsuring aid, pull the cover upward and disconnect them. -
Page 32: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Put the service flap back on, lock it Filter in the water supply is into place and close it. blocked Release water pressure in the supply hose: a) Turn off the tap. b) Select any programme (except Rinse and Spin). -
Page 33: Faults And What To Do About Them
Faults and what to do about them Do not reach into the drum when it is Faults and what to do turning. about them Caution! Water damage! E mergency release Any escaping water may cause water F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 34: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy E:32 Alternating display with End when programme is finished: unbalance problem, spin- ning phase is aborted. w lights up The childproof lock is activated – deactivate it. o lights up Too much foam has been detected and an additional wash cycle has been acti- vated. - Page 35 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the A Start/Reload button or selected Finish in û ■ start. time? Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■ The water is not draining.
- Page 36 Faults and what to do about them Faults Cause/Remedy Detergent/fabric softener There is too much detergent/fabric softener in the dispensers. Do not fill above drips off the seal and col- the max. mark in the dispensers. lects on the door or in the seal fold.
-
Page 37: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 33), please contact our after- sales service. -
Page 38: Technical Data
Technical data Technical data T e c h n i c a l d a t a Dimensions a= 598 mm b= 590 mm c= 848 mm Weight 76kg Mains connection Nominal voltage 220V, 50 Hz Minimum installation protection (c)10 A Nominal power 2050 W Water pressure 0.1–1 MPa (1–10 bar) - Page 40 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001297631* 9001297631 (9812)