V2 Pro 3 Series Manual page 8

Step 1 - Remove the end cap from the cartridge by inserting something small like a
toothpick, paperclip, or tweezers into the small centre hole. Then pry the cap off. Ensure
you have already disconnected the battery!
Step 2 - Attach a V2 Drip Tip to the mouthpiece end of the cartridge.
Step 3 - Drop the E-Liquid directly into the drip tip hole.
Step 4 -
Remove the drip tip and allow the E-Liquid to fully absorb for 20 minutes.
Some users like to vape using the rubber drip tip, but ensure you have wiped any excess
E-Liquid from the tip and have not overfilled the cartridge!
How to refill V2 Cigs cartridges using the reverse drip method
This method is preferred by experienced vapour smokers who are looking for a quick
top-up of their cartridge.
Step 1 - Remove the cartridge from the e cig battery.
Step 2 - Drip E-Liquid into the threaded cartridge hole being careful to not drip it outside
of the hole. You should see the E-Liquid disappear into the hole. Take care not to go too
fast or the E-Liquid will spill onto the cartridge threads.
Step 3 - Clean off any remaining E-Liquid residue.
Step 4 - Let the cartridge sit for a few minutes before using.
What Should You Do if You Get E-Liquid into the Centre Post of a Cartridge?
First, don't panic!
E-Liquid into the centre post, just place a paper towel or napkin on the screw-end of the
cartridge. Then, blow into the cartridge from the mouthpiece end to expel the E-Liquid.
Do not inhale! You are trying to expel the E-Liquid here!!! Now, to avoid getting E-Liquid
into the centre post, you can insert a toothpick into the post while filling the cartridge to
ensure you can't accidently put E-Liquid into it!
You don't have to throw away the cartridge. If you muck up and get
8