Portable Charging Case - V2 Pro 3 Series Manual

Sometimes the netting on the inside of the cartridge is too close to the heating
element. You can actually pop the top off (gently with a bobby pin) and pull it away a
little bit from the heating element (move the netting away from the centre). The netting
is what holds the fluid in the cartridge.
Once the cartridge begins to taste burnt usually the cartridge is no longer
usable as the burnt taste will linger in the cartridge
If the battery is not properly charged it will not product the right amount of vapour and
can produce bad effects as burnt taste, harshness, & little vapour.
//

PORTABLE CHARGING CASE

There is a user manual in your box.
Charging your case (PCC)
Connect the PCC to your computer with the included
USB cord. You can also connect the USB to a wall
adapter. When charging, the blue "CASE" indicator
lights will turn on. When all 5 lights are blue, your PCC
is fully charged.
Charging your V2 E-cigarette Battery
Open the PCC and screw in your V2 e-cigarette
battery. Press the button on the outside of the case
for 3 seconds until the red light turns on and begins to
blink. The PCC is now checking the amount of charge
on your e-cigarette battery. The red "CIG" indicator
lights will turn on to show charge amount. When all 5
lights are red, your battery is fully charged. The PCC
is capable of charging many USB compatible devices
including Cell Phones, MP3 players, PDAs, cameras
and many more portable electronic devices.
TIPS:
• You can check your PCC charge status at any time by tapping the button above the
indicator lights. The "CASE" indicator lights will automatically shut off.
• To check the charge status of your e-cigarette battery, press and hold the button
above the indicator lights for 3 seconds.
• Your PCC is charging when the "CIG" indicator lights are on.
STANDARD PCC OUTPUT
DC4.2V, 200mA with battery
capacity of 1200mAh
PCC XL OUTPUT
DC4.2V, 200mA with battery
capacity of 2300mAh
10