Table of Contents
Advertisement
//
V2 SERIES 3 PRO VAPOURISER
Please unpack your kit very carefully. Do not pull the USB charger out of the packaging.
This will damage your USB charger. Please push it out from the other side of the
packaging. Please read your instruction manual. We recommend that you charge your
Pro Series 3 and 7 using the wall plug.
Some additional diagnostics
If your V2 Pro is not holding charge start at the wall:
1.
Check that the wall adapter is working. You can use an Iphone plug as well.
2.
Check the magnetic USB charger is not faulty. When it is plugged in and fully
functioning the tiny blue light on the magnetic section goes blue. It stays on the whole
time it is plugged into a functioning wall plug. Please check this BEFORE you connect
the Vapouriser. You will not see this blue light if you have the V2 Pro connected.
3.
If the blue light on the USB charger does not come on and STAY on it is the USB
charger that is faulty and we need to send you another one.
4.
If the blue stays on connect the V2 Pro to the USB charger.
5.
We recommend that you lock the device before charging. You do this by pushing
the little button on the front 3 times.
6.
Around the base of the V2 Pro a red light will pulsate. If the red light is pulsating it is
TAKING the charge.
7.
If the light around the base goes GREEN after a short period of time...leave it charging
for a MINIMUM of 2 hours. An empty V2 Pro needs a minimum of 2 hours to be fully
charged.
8.
If this does not resolve the problem then it is your Vapouriser that is faulty.
9.
Your V2 Pro Series 3 needs recharging when the white LED light at the bottom of the
V2 begins a set of double blinks that dim off gradually.
10.
Change your liquid cartridge 15-20 refills. Overuse of the cartridge could damage your
V2 Pro Series 3.
11.
Change your Loose Leaf Cartridge every 3 to 4 months but please consult website
for the complete instructions.
//
V2 SERIES 7 PRO VAPOURISER
To enjoy your Pro Series 7 please pay special attention to the following:
1.
There are different temperature settings for the loose leaf cartridge. It is important
that you select the correct temperature setting.
2.
Your liquid and Loose Leaf cartridges need to be replaced regularly.
3.
Please note the mouth piece is fairly delicate so remove it gently and per the instructions.
4.
Pay special attention to following the correct procedure for refilling the liquid cartridge.
Doing this incorrectly can lead to liquid in your mouth.
5.
Please clean your kit regularly with cotton buds including your cartridges.
11
Hide quick links:
Advertisement
Table of Contents
