The Indoor Unit Installation - LG CL09F Owners & Installation Manual

THE INDOOR UNIT INSTALLATION

Ceiling
TP/TN/TM Chassis
875(Ceiling opening)
787(Hanging bolt)
840 Unit size
TQ/TR Chassis
585~660
517
570
461
TU Chassis
600 50
860
250
- Select and mark the position for fixing bolts
and piping hole.
- Decide the position for fixing bolts slightly
tilted to the drain direction after considering
the direction of drain hose.
- Drill the hole for anchor bolt on the wall.
Level gauge
Ceiling board
4Way
Unit:mm
1Way
Keep the
length of the
bolt from
the bracket
to 40 mm
Unit:mm
1 065
965
50
* The feature can be changed according to
THE INDOOR UNIT INSTALLATION
CAUTION
!
• This air-conditioner uses a drain pump.
• Install the unit horizontally using a level
gauge.
• During the installation, care should be
taken not to damage electric wires.
Ceiling
Keep the
length of the
bolt from
the bracket
to 40 mm
Air Conditioner body
Ceiling board
Keep the length of 15~18 mm
between the air conditioner
bottom surface and the ceiling
surface
Set screw of
Paper model
paper model (4 pieces)
for installation
Adjust the
Open the ceiling board
same height
along the outer edge of the
paper model
Ceiling
Air conditioner body
Ceiling board
Keep the length of 20~22 mm
between the air conditioner bottom
surface and the ceiling surface
Paper model Set screw of
paper model (4 pieces)
for installation
Open the ceiling board
Adjust the same height
along the outer edge of the
paper model
Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
type of model.
11
Ceiling
board
Ceiling
board
Flat washer for M10
(accessory)
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)