Download Print this page

NDS PF12CH25S – 12V 25A Operation Manual page 2

Professional power chargers

Advertisement

INTRODUCTION
This manual contains important operating and safety instructions, before starting to
use the battery charger it is important to read and understand the safety instructions in
this manual.
Safety notes
– Before each use please check the battery charger, the connection cable and the
connector. If any malfunction is detected do not use it! It is strictly forbidden to
open the device. Repairs may only be carried out by qualified technicians using
original spare parts. A charger, a cable and / or a damaged connector increases
the risk of fatal electric shocks.
– Do not place the charger on highly flammable surfaces or environments (ex .:
paper, cloth etc ...). The overheating of the device during the charging phases
can increase the risk of fire.
– During operation the device should be placed in a well-ventilated place.
– If the power supply cable is damaged it must be replaced by a qualified
technician to eliminate the risk of accidents.
WARNING
– Never charge a cold or non-rechargeable battery!
– Keep the device out of the reach of children
– The device must be protected from sunlight or direct heat sources to prevent
overheating.
– To reduce the risk of malfunctions do not block the ventilation bores.
– DO NOT install the unit in a sealed environment, otherwise it may overheat.
– To avoid the risk of electric shock and / or fire, make sure that the power
supply system is in good condition.
– DO NOT use the charger with damaged cables and / or with inadequate
section.
– DO NOT use the battery charger in an environment with high humidity or in
direct contact with splashes of water and / or other liquid or in the rain.
1

Advertisement

loading

This manual is also suitable for:

Pf12ch12s – 12v 15a