Maintenance; Slot Monitor (Monitoring The Wireless Operating Status) - Panasonic WX-SR202P Operating Instructions Manual

Maintenance

There are the following four maintenance functions. Select one of the following functions. The displayed screen changes
depending on the selection.
● Slot monitor
● Simple spectrum analyzer
● Walk test
● Update
● Do not use this software at the same time as the Operations Support Software. The software may not operate
Important properly.
Slot Monitor (monitoring the wireless operating
status)
This function allows to monitor the wireless operating status of the selected antenna, microphone.
1
Connect with a microphone, or receiver.
2
Select the [Slot Monitor] tab.
When a receiver is connected, select the antenna for monitoring.
A Antenna selection setting (only when a receiver is connected)
Select the antenna for slot monitoring.
B Slot monitoring [Start]/[Stop] buttons
Click the [Start] button to run slot monitoring using the selected antenna. Click the [Stop] button to stop slot monitoring.
C Slot monitor result display
Area to display the slot monitoring results. A cell is empty if the slot is not in use, and a cell contains a black circle if the
slot is in use.
3
Click the [Start] button.
● When a microphone is connected, the [PWR] indicator of the microphone will blink green and no audio will be output.
The slot monitor results are displayed.
Click the [Stop] button to stop monitoring.
● When connecting with a microphone, the [PWR] indicator of the microphone goes off once before the microphone
returns to the normal status.
A
C
[Maintenance] — [Slot Monitor] screen
B
11