Updating; X84; Update A Receiver, Or Antenna - Panasonic WX-SR202P Operating Instructions Manual

Maintenance

Updating

This section describes how to update the selected device. Receivers, antennas, or microphones can be updated.

„ Update a receiver, or antenna

1
Select the [Update] tab.
2
In the [Connected devices] list, select [Receiver] and connect.
3
Select the update target.
For antennas, select the number of the target antenna connector next to [Target unit].
A Target selection
Select the combination of device and software to update.
● Receiver: Application (CPU) / FPGA / DSP
● Antenna: Main / Sub / FPGA
B Target unit selection
Select the unit of the target antenna.
C [Select Update File]
Select the update file (.bin extension). The files can be obtained from the following URL.
URL：https://na.panasonic.com/us/audio-video-solutions/sound/
[Update] button
④
Run the update.
Target device version display
⑤
Displays the current version of the target device. The following update targets are displayed for each target device.
● Receiver: Application (CPU) / FPGA / DSP
● Antenna: Main / Sub / FPGA (Show the one corresponding to
Important
4
Select the update file and click the [Run] button.
The update starts.
● The microphone will output no audio during the update.
● While updating an antenna, the [Antenna] indicator on the receiver and the [POWER] indicator on the antenna will
blink orange.
A
E
[Update] screen (receiver)
B C
)
①
14
D