Before First Use; Preparing Ingredients; Speed Settings - Silvercrest SSME 250 A2 Operating Instructions Manual

CAUTION! PROPERTY DAMAGE!
Never fill the appliance with hard ingredients such as nuts, stalks,
►
large grains or seeds!
Never fill the appliance with hot ingredients!
►
Never crush ice cubes without any liquid in the blender jug!
►

Before first use

1) Remove all of the parts from the box and
remove the packaging material and any
protective film .
2) Clean all components as described in the
section "Cleaning and Care" . Ensure that all
parts are completely dry .

Preparing ingredients

■ Remove all peel, such as orange peel or kiwi
skin, from the fruit .
■ Remove large pips and stones, e .g . peach
stones, from the fruits .
■ Cut the fruit into small pieces (approx . 1 – 2 cm) .
■ Chop herbs or salads into small pieces .
NOTE
► You can also crush ice cubes with this
appliance (max 50 g/approx . 2–4 ice
cubes) . Only add the whole ice cubes to the
blender jug 1/9 if they are being processed
together with liquids . Always use the pulse
function when you process whole ice cubes .
Generally, however, we recommend that you
use already crushed ice in this device .
SSME 250 A2

Speed settings

„0"
Appliance is switched off .
„I"
For chopping and blending soft and liquid ingredi-
ents such as strawberries or yoghurt .
„II"
For chopping and blending harder and liquid
ingredients such as beetroot or pumpkin .
„P"
For short, powerful pulse operation (Pulse function),
e .g . for crushing ice cubes or for cleaning . To avoid
overburdening the motor, the speed switch 6 does
not lock into this position . Only hold the speed
switch 6 in this position for short periods .
GB │ IE │ NI │ CY │ 5 ■