Multicast Page Zones - Algo 8188 User Manual

Multicast Page Zones

The 8188 SIP Ceiling Speaker supports nine "basic" multicast zones. These zones are
defined by the multicast IP addresses.
Somewhat arbitrarily, these zones are defined below but may be used in other ways. The
important consideration is that there is a priority hierarchy – streaming activity on a zone
higher on the list will be treated as a higher priority than a zone lower on the list – with mu-
sic being the lowest priority.

Priority

All Call

Zone 1

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Music
There are two options for Paging to multiple zones: "DTMF Selectable Mode" or via mul-
tiple page extensions.
The "DTMF Selectable Mode" offers a dynamic page zone selection and requires only the
master device to have a registered SIP Extension. To page, dial the SIP extension of the
master device and then dial the desired DTMF page zone (e.g. 1, 2, etc.) on the keypad.
Note: DTMF codes for zones 10 and higher start with an "*".
Document 90-00069A
2020/4/15
Page 14
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
(604) 454-3792
support@algosolutions.com