Reset - Algo 8188 User Manual

Blue LED Indicator
The blue LED is visible through the speaker grill and by default will be on when the
speaker is active. The blue LED will also be on during power up and boot process.
The blue LED can also provide a heartbeat with a flash every 30 seconds to indicate that
the speaker is powered and connected to the network.
If the 8188 SIP Ceiling Speaker is in talkback mode the blue LED will be flashing.

Reset

A recessed reset button (RST) next to the blue LED can only be used to reset the 8188
SIP Ceiling Speaker at time of power up. To return all the settings to the factory default for
the 8188, reboot or power cycle the 8188. Wait until the blue LED flashes and then press
and hold the reset button until the blue LED begins a double flash pattern. Release the re-
set button and allow the unit to complete its boot process.
Do not press the reset button until the LED begins flashing.
A reset will set all configuration options to factory default including the login
password.
Once booting has completed, pressing the reset button will cause the speaker to annunci-
ate its IP address over the speaker.
Document 90-00069A
2020/4/15
Page 23
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
(604) 454-3792
support@algosolutions.com