Programming And Configuration - Algo 8188 User Manual

Programming and Configuration

The 8188 SIP SIP Ceiling Speaker is configurable using the web interface or provisioning
features.
After boot up the blue light will turn off and the speaker will have obtained an IP address.
If there is no DHCP server the 8188 SIP Ceiling Speaker will default to the static IP ad-
dress 192.168.1.111.
Press the reset switch (RST next to the light) momentarily to hear the IP address over the
speaker. The reset switch will not cause a reset unless pressed during power up.
The IP address may also be discovered by downloading the Algo locator tool to find Algo
devices on your network:
Enter the IP address (e.g. 192.168.1.111) into a browser such as Chrome, Firefox or
Edge. The web interface should be visible and the default password will be algo in lower
case letters.
Document 90-00069A
2020/4/15
Page 11
www.algosolutions.com/locator
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
(604) 454-3792
support@algosolutions.com