Table of Contents
Advertisement
TM00358 Rev. A
Table 4-1 Turret Shipping Case & LRU Packaging
Packaging
Turret Shipping Case
Shipping case
Turret
Service stand assembly
Service stand, top plate
Service stand, mounting
screws
Service Stand, legs
Service stand, leg mounting
screws
LRU Packages
For example:
Note: When the turret is removed from its shipping case, retain the case in a safe location. The case is intended to
be reused when shipping the turret for depot service or for safe storage as a spare unit.
Unpacking Non-Turret LRU Shipping Packages
1. Inspect the package's exterior for physical damage. Exterior damage may indicate internal damage to the
contents:
•
Report any damage to your supervisor immediately.
2. Open and unpack the package.
3. Inspect each part as you remove it from the case.
•
Report any damage to your supervisor immediately.
L-3 WESCAM
All Rights Reserved
Contents
• Operator Interface
• Support items and spares
as ordered
Chapter 4 - Turret Shipping Cases & Storage
Part Number
Qty.
41179
1
42390
1
42626
1
25705
1
CSNAS1514CA
6
23216
4
1114119 1.00SS
4
Part numbers and weight vary based on support items and spares
ordered.
Notes
• Case weighs approximately
125 kg (276 lbs)
• 6 Cap screws, hex socket –
1/4"-28 x 3/4
Note: Caps are painted red to
designate use for service
stand only.
• 4 Cap screws, 1/2-13 x 1.00
October 2007
71
Advertisement
Table of Contents
