Mission Menu; Mission Menu; Figure 2-29 Level 2 Mission Menu; Table 2-13 Status Information And Controls In The Level 2 Mission Menu - L3 Communications MX-15i Operation & Maintenance Manual

Chapter 2 - Mission Menu

2.12 MISSION MENU

The Mission menu provides status information and controls for configuring mission data, such as date and time or
setting preferences for readout units of measure. For example, the operator may prefer to have altitude measured in
meters as opposed to feet.

Table 2-13 Status Information and Controls in the Level 2 Mission Menu

Field
DATE
LOCAL TIME
UTC OFFSET
AIRCRAFT LOCATION
TARGET LOCATION
AIRCRAFT ALTITUDE
TERRAIN ALTITUDE
SLANT RANGE
TERRAIN ALTITUDE
SOURCE
October 2007
44
LEVEL 2 - MISSION
DATE
LOCAL TIME
UTC OFFSET
AIRCRAFT LOCATION
TARGET LOCATION
AIRCRAFT ALTITUDE
TERRAIN ALTITUDE
SLANT RANGE
TERRAIN ALTITUDE SOURCE
TERRAIN ALTITUDE

Figure 2-29 Level 2 Mission Menu

Values
VALUE FIELDS
DD, MM, YYYY Selects date options. All are set by the SET TIME action field.
Hours, Minutes, Selects time options. All are set by the SET TIME action field.
Seconds
±16 Sets the Greenwich Mean Time regional differential value in ½ hour
increments.
Decimal Degs, Sets the display format for location data to:
Degs:Min:Min, • one of three degrees options
Degs:Min:Secs, • Military Grid Reference Survey.
MGRS
Feet, Meters Sets the display units for altitude data.
Feet, Meters Sets the display units for elevation data.
Feet, Miles, Sets the display units for distance data.
Nautical Miles,
Meters, Kilometers
MANUAL, MAP Sets the source for terrain measurement data.
08 MAY 2006
05 11 55
5.0
DEGS:MIN:SECS
DEGS:MIN:SECS
FEET
FEET
NAUTICAL MILES
MANUAL
300
SET TIME FACTORY DFLT DONE
Description
TM00358 Rev. A
L-3 WESCAM
All Rights Reserved