Table of Contents
Advertisement
TM00358 Rev. A
WARNING: AVOID DESICCANT MATERIAL CONTACT WITH SKIN, INGESTION OR INHALATION OF DUST.
WHEN FIRST EXPOSED TO WATER, THE DESICCANT MATERIAL BECOMES VERY HOT.
Caution:
Make sure no water enters the desiccant enclosure during desiccant exchange.
Caution:
Remove the breather valve while it is facing upwards so desiccant material does not spill out.
Caution:
Do not over fill or pack the desiccant material. Room must be left for the filler port to seat
properly.
Caution:
Store and pack the turret by following the procedures defined in Chapter 4 of this manual.
When shipping items, it is the customer's responsibility to correctly pack and obtain insurance.
L-3 Wescam is not liable for any damage that occurs during shipment.
Caution:
Use anti-static, Electrostatic Discharge (ESD), pink bubble wrap only. For all self pack LRUs,
use safe ESD bubble wrap to protect electrical components during shipment.
L-3 WESCAM
All Rights Reserved
Warnings & Cautions
October 2007
v
Advertisement
Table of Contents
