Hand Controller Controls; Hand Controller Controls; Hand Controller - Primary Switch Controls; Figure 2-1 Hand Controller - L3 Communications MX-15i Operation & Maintenance Manual

Chapter 2 - Hand Controller Controls

2.1 HAND CONTROLLER CONTROLS

Operators can use the Hand Controller to perform the following functions:
• Turn turret power ON or OFF
• Steer the turret
• Control system sensors
• Change mode settings
• Access and navigate the user menus
• View power and laser status indicator LEDs
The Hand Controller is used for the most common operator functions. All operator control descriptions, assume
default settings of the Level 2 Operator Gimbal Menu. A number of parameters in the Level 2 Operator Gimbal
Menu can be used to tailor operation of the Hand Controller; however, tailoring is optional and not normally required.
Deadman lever
2.1.1 Hand Controller – Primary Switch Controls
3
2
1
14
13
October 2007
10
Face plate controls
Joystick
Handle

Figure 2-1 Hand Controller

4
AUTO
12

Figure 2-2 Hand Controller Face Plate Switches

5 6
IMAGE
INT
SLEW
FWD FILTER IMAGE
MODE
11 10 9
TM00358 Rev. A
Top buttons
Position detents
7
8
15
16
17
L-3 WESCAM
All Rights Reserved