Table of Contents
Advertisement
4.3.8.5
Alert Settings
When positioning by GPS is disabled, the interval time before issuing an alert can be set.
1.
Touch the [ALERT] button in the submenu.
An alert issuing setting screen is displayed.
2.
Set the elapsed time for issuing an alert by touching the [-]/[+] buttons of [SBAS
MODE].
One of [OFF] (alert hidden), [1 min], [2 min], and [3 min] can be set.
For instance, when [1 min] is set, an alert is issued one minute after the positioning by GPS is
stopped.
This alert indicates the "stopping of the communication with GPS".
3.
Set the time from switching to DR (Dead Reckoning) to the issuing of alert by touching
the [-]/[+] buttons.
One of [1 min], [2 min], and [3 min] can be set.
For instance, when [2 min] is set, at the stopping of positioning by GPS, the operation is
switched to DR and, after 2 minutes, an alert is issued.
This alert indicates "deterioration of the accuracy of the predicted position".
4.
Close the [ALERT] submenu by touching the
5.
Close the [GNSS SET] menu by touching the
4.3.9 SDME Advanced Settings
This menu is used by engineers who are assigned to install this equipment.
This menu is not used by general users.
button.
button.
4-21
Chapter 4 Menu Settings and Configurations
4
Advertisement
Table of Contents
