Table of Contents
Advertisement
Do not use or leave the equipment under direct sunlight for a long time or in
the temperatures above 55°C. (except wing display)
Otherwise, fire or a malfunction may occur.
Do not install the equipment in a place under the influence of water, humidity,
vapor, dust or soot. (except wing display)
Failure to comply may result in fire, an electric shock, or an equipment
malfunction.
Do not place this equipment in a location under the influence of frequent
vibrations or impact.
Failure to comply may cause the equipment to drop or fall over, resulting an
injury or an equipment fault.
This equipment may not satisfy the desired performance and functionality
when it is installed other than ships.
Because this product is designed to be installed for ship.
Adjustments must be made by specialized service technicians.
Incorrect settings may result in unstable operation, and this may lead to
accidents or equipment failure.
Do not rotate the semi-fixed resistor and trimmer condenser that are installed
in its equipment since they have been adjusted to the exact positions.
Failure to comply may result in an equipment fault or malfunctioning.
Do not apply any undue shock on the operation panel.
Otherwise, a malfunction may result.
When cleaning the display screen, do not wipe it too strongly with a dry cloth.
Also, do not use gasoline or thinner to clean the screen.
Failure will result in damage to the screen surface.
Adjust the brightness of main display according to the surrounding lighting;
particularly using the brightness pattern [NIGHT] may interfere with the
recognition of display information.
xxii
Advertisement
Table of Contents
