Advertisement
There are four buttons and an LCD on the panel of duplicator.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
Connecting the power cable and turning on the duplicator
a.
Connect the power cord provided from the wall outlet to the back of the duplicator.
b. A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary
power switch is located on the front of the tower.
Steps for the Copying Process (Note: may not able to copy-protected DVD or CD)
1. Turn on the duplicator by pressing the auxiliary power switch.
2. Insert media you wish to duplicate into the source tray on the top.
www.addonics.com
Overview
Technical Support (M-F 8:30am - 6:00pm PST)
3. Turn on the duplicator by pressing the auxiliary power switch.
4. Insert media you wish to duplicate into the source tray on the top.
5. Populate the destination trays with blank CDs or DVD media. A rewritable DVD
containing old data can also be use, but the old data will be automatically
erased
6. After the DVD-ROM and DVD writers detect DVDs, press ENT button to start
copying
LCD will show the copying information as follows.
COPY
X3 4400M
97% 3.9X 4367M
When copying is in progress, MB and time will decrease while the percentage of
completion will increase. "MB" means the size of data that you want to copy.
When copying comes to an end, LCD will show the results as follows. The DVDs that
were successfully copied will eject automatically.
RESULT:
Please review the duplicator controller user manual in
PASS 3
FAIL 0
the included CD for a full description of the various
options. You may also download a copy from the
product web page
http://addonics.com/products/dgc3.php#tabs-5
Phone: 408-453-6212
Email. www. Addonics.com/support/query/
Advertisement
