Warnings - Graco PRESIDENT HYDRA-SPRAY A Series Instructions-Parts List Manual

Wall mount 30:1
Hide thumbs Also See for PRESIDENT HYDRA-SPRAY A Series:
Table of Contents

Advertisement

Warning Symbol
WARNING
his symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
INSTRUCTIONS
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are not sure, call Graco Technical Assis-
tance at 1–800–543–0339.
Do not alter or modify this equipment.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component. Do not
exceed 100 psi (6,9 bar) air pressure to the motor. Refer to the pump instruction manual for the
maximum fluid working pressure of this equipment.
Do not exceed the maximum temperature rating of the lowest rated system component.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data section of all equipment manuals. Read the fluid and solvent manufacturer's warn-
ings.
Do not use hoses to pull equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not ex-
pose Graco hoses to temperatures above 82 C (180 F) or below –40 C (–40 F).
Do not lift pressurized equipment.
Wear hearing protection when operating this equipment.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
Symbols
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
WARNING
CAUTION

Advertisement

Table of Contents
loading

Table of Contents