Table of Contents
Advertisement
AIR LINE LUBRICATOR
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
214-848 1/2 npt inlet and outlet
214-849 3/4 npt inlet and outlet
AIR LINE FILTER
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
106-149 1/2 npt inlet and outlet
106-150 3/4 npt inlet and outlet
STAINLESS STEEL AIRLESS SPRAY GUN
5000 psi (350 bar) MAXIMUM WORKING PRESSURE
208-327
.037" orifice, 2-finger trigger
208-663
.090" orifice, 2-finger trigger
208-664
.090" orifice, 4-finger trigger
220-954
.090" orifice, 2-finger trigger,
RAC
IV DripLess
GROUNDED BUNA-N AIR SUPPLY HOSE
175 psi (12 bar) MAXIMUM WORKING PRESSURE
Part No.
ID
205-418
1/2" (13 mm)
205-216
1/2" (13 mm)
205-273
1/2" (13 mm)
208-594
1/2" (13 mm)
BACK PRESSURE REGULATOR 206-819
3000 psi (210 bar) MAXIMUM WORKING PRESSURE
Use in circulating system fluid return line to regulate back
pressure to gun and maintain proper circulating pres-
sure.
FLUID PRESSURE REGULATOR 206-661
3000 psi (210 bar) MAXIMUM WORKING PRESSURE
Use at each gun drop in multiple gun systems, to regulate
fluid pressure to each gun.
Accessories
USE GENUINE GRACO PARTS AND ACCESSORIES
tip guard
Length
Thd. Size
6 ft (1.8 m)
1/2 npt(m)
15 ft (4.5 m)
1/2 npt(m)
25 ft (7.6 m)
1/2 npt(m)
50 ft (15 m)
1/2 npt(m)
GROUNDED NYLON FLUID HOSE
3000 psi (210 bar) MAXIMUM WORKING PRESSURE
Part No.
ID
214-700
3/16" (4.8 mm)
214-701
3/16" (4.8 mm)
223-540
1/4" (6.4 mm)
223-541
1/4" (6.4 mm)
214-703
3/8" (9.5 mm)
214-705
3/8" (9.5 mm)
214-920
3/8" (9.5 mm)
INSULATED HOSE KIT 222-263
3000 psi (210 bar) MAXIMUM WORKING PRESSURE
25 ft. (7.6 m) nylon fluid hose for use with heated sys-
tems. Includes in-line fluid filter, circulating manifold, and
3 ft. (0.9 m) whip hose.
VISCON FLUID HEATER
4000 psi (276 bar) MAXIMUM WORKING PRESSURE
Specify desired voltage when ordering (see below).
Heater reduces fluid viscosity for easier spraying. Stain-
less steel. Refer to Instruction Manual 307-805.
Model 220-522 (120 V, single-phase, 16.7 Amp)
Model 220-523 (240 V, single-phase, 9.6 Amp)
Model 220-524 (480 V, single-phase, 4.8 Amp)
VISCON HEATER CORD 110-160
12 gauge, rated at 105 C.
WARNING: Not for use in hazardous areas containing
flammable materials or fumes.
HEATER CONVERSION KITS
Use to convert pump Model 222-268 to a heated spray
system. See pages 16 and 17 for parts. Viscon Heater
must be ordered separately.
222-269
Heater Mounting Kit
222-270
Circulating Kit
SST PIPE SEALANT 110-110
Apply to all non-swiveling pipe connections.
6 ml supply.
Length
Thd. Size
2 ft (610 mm)
1/4 npsm
(fbe) swivel
3 ft (914 mm)
1/4 npt(m)
x 1/4
npsm(f)
swivel
25 ft (7.6 m)
1/4 npsm
(fbe) swivel
50 ft (15.2 m)
1/4 npsm
(fbe) swivel
25 ft (7.6 m)
3/8 npt
(mbe)
50 ft (15.2 m)
3/8 npt
(mbe)
100 ft (30.4 m)
3/8 npt
(mbe)
Advertisement
Table of Contents
