Page 2
Quick Installation Guide - Match the inverter with the bracket. - Screw the expansion screws. - Screw the cross recessed screw on the right side. —— X1 Series 1.1kw-2.0kw Packing List PV Connection Cable size: 12 AWG -Align the two halves connectors.
Page 3
Warning! - Open the WiFi lid on the bottom of the inverter. - Plug the Pocket WiFi (from Solax) into the port named Be sure this ground wire must be connected ! “WiFi” on inverter, and tighten the four screws as below.
Need help?
Do you have a question about the X1 Series and is the answer not in the manual?
Questions and answers