Vector POS TOUCH 12 WIDE Notes On Safety And Installation page 42

NOTES ON SAFETY AND INSTALLATION
POS TOuch 14 Wide
Errors
The POS Touch 14 Wide
does not display
anything.
The POS Touch 14 Wide
processes other
entries than those
made on the touch
screen.
Login via operator
key is not possible.
42
Possible reasons
The POS Touch 14 Wide is
switched off.
The screen saver is active.
The Vectron POS software is
malfunctioning.
The power supply is damaged.
The POS Touch 14 Wide is
damaged.
The Vectron POS software is
malfunctioning.
Programming and configuration
of the POS Touch 14 Wide is
faulty.
The touch screen is damaged.
The operator lock was neither
programmed nor configured.
Operator lock or operator key
are damaged.
Troubleshooting
Press the On/Off key
as described in chapter
7.1.1 "Switching on
POS Touch 14 Wide" on page
26.
Touch the screen with the stylus
or with a finger.
Contact your dealer Vectron.
Contact your dealer Vectron.
Contact your dealer Vectron.
Reboot the POS Touch 14 Wide
as described in chapter 7.1.3
"Restart POS Touch 14 Wide" on
page 27.
Contact your dealer Vectron.
Contact your dealer Vectron.
Contact your dealer Vectron.
Contact your dealer Vectron.