Transferring Gcs To Another Operator; Working With Hold Buffers; Working With Reports; Correction Or Void Last Entry - Vector POS TOUCH 12 WIDE Notes On Safety And Installation

NOTES ON SAFETY AND INSTALLATION
POS TOuch 14 Wide

7.4.8. Transferring GCs to another operator

This function serves for transferring a guest check to another operator.
This function can be enabled optionally.
7.5. Working with hold buffers
The hold buffer function allows several operators to work simultaneously at one
POS system.
The first operator opens a hold buffer, signs in and books the PLUs. If a second
operator wants to use the POS system in the meantime, he presses a new hold
buffer button, signs in and books the PLUs. The operators' bookings are stored in
the respective hold buffer until media finalization.
This function can be enabled optionally.
7.6. Working with reports
Reports serve for evaluating data that were stored in the POS system.
With Vectron POS software you can create two types of reports, X-reports and
Z-reports: Z-reports are final reports where the data is deleted from the booking
memory. X-reports are intermediate reports, where the data is just polled.
7.7. Correction or void last entry
This function can be enabled optionally.
38