Switching Off The Pos Touch 14 Wide; Restart Pos Touch 14 Wide; User Interface - Vector POS TOUCH 12 WIDE Notes On Safety And Installation

7.1.2. Switching off the POS Touch 14 Wide

X Shortly press the on-/off key to switch off the .POS Touch 14 Wide.

7.1.3. Restart POS Touch 14 Wide

X Shortly press the on-/off key to switch off the POS Touch 14 Wide.
X Wait for about 10 seconds.
X Shortly press the on-/off key to switch on the POS Touch 14 Wide.
7.2. User interface
This chapter describes an example configuration of the Vectron POS
i
software.
Programming and configuration of your POS system can differ
considerably from this example. Your Vectron specialist retailer has
programmed the POS Touch 14 Wide for you and is your contact partner
for questions concerning the programming.
After having started and switched on the POS Touch 14 Wide, your POS system is
ready for data input.
Damage of touch screen caused by unsuitable objects.
A Please touch the screen exclusively with fingers or the provided stylus.
© Vectron Systems AG | Current as of 12/18 | Alterations and errors excepted.
A NOTICE
27