Start-Up; Setting Up The Pos Touch 14 Wide; Selecting The Set-Up Site For The Pos Touch 14 Wide - Vector POS TOUCH 12 WIDE Notes On Safety And Installation

NOTES ON SAFETY AND INSTALLATION
POS TOuch 14 Wide

6. Start-up

i
Your Vectron specialist retailer has programmed the POS Touch 14 Wide
for you. If necessary, he will be glad to support you during initial
start-up and will train you in using your POS system.
6.1. Setting up the POS Touch 14 Wide

6.1.1. Selecting the set-up site for the POS Touch 14 Wide

X Set up the POS Touch 14 Wide in a well ventilated room with a temperature of
between 0 and 40°C.
X The POS Touch 14 Wide must not be covered during operation.
X Select the setup site so that the POS Touch 14 Wide is not exposed to direct
sunlight.
X Place the POS Touch 14 Wide on a stable, even surface with sufficient space.
X Make sure that no liquids can flow over the POS Touch 14 Wide, the power
supply unit or the mains cable.
X Route the cables so that they are not subjected to tension.
X Route the cables in such a way that nobody can trip over them.
X When mounting the POS Touch 14 Wide on a wall, ensure that the wall and the
suspension elements used have sufficient load-bearing capacity.
22