Care And Maintenance - laerdal Multi-Venous IV Training Arm Directions For Use Manual

3. Remove tubing from track in mandrel. Tack glue
may need to be cut away to allow
removal.
4. Rinse and dry vein grooves well
and swab with alcohol. Be sure
to remove any excess glue.
5. Place new veins along grooves,
spot gluing as needed. (See Fig.
2)
6. Rinse inside of arm skin with
soap and water. Lather arm
mandrel with liquid soap.
7. Slide arm skin over mandrel and work
mandrel into fingers.
(See Fig. 3)
8. Rinse off excess soap and dry.

Care and Maintenance:

1. Clean with mild soap and water; do not submerse in
cleaning fluids or water.
2. Use only on clean surface. Avoid felt tipped
markers, ink pens, acetone, iodine or other staining
products and avoid placing the manikin on
newsprint or inked lines of any kind.
3. To ensure longevity, each manikin and module
should be cleaned after each training session and a
general inspection should be conducted regularly.
312025
Fig. 3
5
Fig. 2