6. Connect the RGB Hub ........7. Remote Control ..........09 8. Caution ............. 09 Thank you for purchasing a Rosewill Liquid CPU Cooler. Please read the instruction manual before use and retain for future reference. The product images used are for illustration purposes only...
RGB Advanced RGB Advanced Liquid CPU Cooler PB240-RGB Quick User Guide Liquid CPU Cooler PB240-RGB Quick User Guide Product Overview Installation Guide 1. Install the Fan and Radiator into PC Case 1-1 Secure fans on radiator with eight #6-32x29.5 mm screws.
RGB Advanced RGB Advanced Liquid CPU Cooler PB240-RGB Quick User Guide Liquid CPU Cooler PB240-RGB Quick User Guide Installation Guide Installation Guide 2. Instructions for LGA 2066 and 2011 3. Instructions for AMD Water Block 3-1 Uninstall the Intel Clip and find the correct AMD buckle as shown in figure.
RGB Advanced RGB Advanced Liquid CPU Cooler PB240-RGB Quick User Guide Liquid CPU Cooler PB240-RGB Quick User Guide Installation Guide Installation Guide 4. Instructions for AMD / Intel 5. Connect Power to the Water Pump 4-1 Confirm the motherboard and match the correct side of backplate (AMD / Intel).
RGB Advanced RGB Advanced Liquid CPU Cooler PB240-RGB Quick User Guide Liquid CPU Cooler PB240-RGB Quick User Guide Installation Guide Installation Guide 6. Connect the RGB Hub 7. Remote Control To switch remote controller to motherboard synchronization, press the remote control’s 6-1 Connect the fan cable and water block cable into the RGB fan hub slot labeled “Fans”.
Page 7
Technical Support Information techsupport@rosewill.com 1-800-575-9885 ---------------------------------------------------------------------------------- Thank you for purchasing a quality Rosewill product. Please register your product at www.rosewill.com for complete warranty information and support for your product. PB240-RGB_A...
Need help?
Do you have a question about the PB240-RGB and is the answer not in the manual?
Questions and answers