Preparing And Loading The Dishware; Loading The Top Rack - Bosch SHE66C Use And Care Manual

Preparing and Loading the Dishware

Loading the Top Rack

Figures 1 and 2 show typical mixed loads for the
top rack.
12 place setting
Top Rack Accessories
Top Rack Flip Tines
Flip Tines fold down to make loading the racks
easier in
some
instances.
Grasp the
tines as
shown in
Figure 3
and fold
the tines
downward.
6
Figure 1
Figure 2
Figure 3
(continued)
When the top rack is loaded, push it into the
dishwasher.
NOTE : When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub so the top rack spray arm will connect
to the water supply.
RACKMATIC™ Top Rack Height Adjustment
(models SHE66C, SHV57C and SHX57C)
The top rack can be lowered to accommodate
large items in the top rack, and raised to make
room for large items in the bottom rack.
To lower the top
rack:
1. Pull the top
rack out of the
dishwasher until
it stops rolling.
2. Press the
RACKMATIC™
handles inward
as shown in
Figure 4 and let
the rack drop.
To raise the top rack:
1. Pull the top rack out of the dishwasher until it
stops rolling.
2. Grasp the top
of the rack
above the
RACKMATIC™
handles and
pull it upward
as shown in
Figure 5
until the
RACKMATIC™
handles lock the rack into position (you do not
need to press the RACKMATIC™ handles in
order raise the rack).
NOTE: Before you push the top rack back
into the dishwasher, ensure that the rack
height is the same on both sides. Otherwise,
the dishwasher door will not shut and the top
rack spray arm will not connect to the water
circuit.
3. Push the top rack back into the dishwasher.
Figure 4
Figure 5