Vcr Connection - Panasonic CT-36SX31 Operating Instructions Manual

I
NSTALLATION

VCR Connection

(For models CT-27SX31/U, CT-32SX31/U, and CT-36SX31/U)
Follow this diagram when connecting your television to a VCR only.
INPUT 3
S-VIDEO VIDEO L AUDIO R
TERMINALS ON FRONT OF TV
Viewing a television program
Procedure
Viewing a video
Procedure
r
r
10
Note: VIDEO 1input is a dual-purpose input. It is primarily intended for connection
with 480i devices such as a DVD player using the Y P
jacks and Audio L & R jacks. However, it can also be connected to
conventional composite video sources such as a VCR, using only the Y/Video
jack and Audio L & R jacks. The on-screen label will display Component or
Video 1 depending on which source is connected.
VCR
VIDEO OUT
L
AUDIO OUT
R
ANT OUT ANT IN
Jack used for 1/8"
headpone plug
HPJ
Note: The remote control must be programmed with supplied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Option A
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
Option B
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
CONNECTIONS ON BACK OF TV (may vary)
AUDIO
R
Incoming
Cable ANT 1
P
R
SPLIT
OUT
ANT 2
R
CABLES NOT SUPPLIED
P component video
B R
INPUT 1
COMPONENT
L
VIDEO INPUT
PROG.
OUT
P Y/VIDEO
B
Use either
L
INPUT 2
S-Video or Video
TO AUDIO
connection. AMP
S-VIDEO
R
L
VIDEO
the