Control Operation
Power Button
- Pressthe POWER button to tum
ON. Press again to turn OFF.
POWER
Channel Change- (Two
options)
Option 1.
Press the CHANNEL (CH) UP or DOWN button to
sequentially scan through programmed channels
(when On Screen Menus are not displayed).
NOTE: TV/AUX/CABLE
switch (located on Remote)
must be set in TV position.
"FVlAUX/CABLE
Located On Remote Control
Volume Button
-
Press the VOLUME (VOL)
LEFT or RIGHT button for desired listening level (when
On Screen Menus are not displayed).
Located On Remote Control
Decreases
Volume Level
Increases
Volume Level
Mute Button
- Press the MUTE button to quickly
reduce sound level (Mute will appear on screen). Press
again to restore sound.
MUTE
Helpful Hints:
• Helpful information will display On Screen momen-
tarilywhen Receiver is first turned on and when the
channel is changed.
• When using keyboard entry for channels 10,11 and
12 in the CABLE mode there is a slight delay before
channel change because of the capability of tuning
cable channels 100 to 125.
• Ifyou do not receive channels above 13, confirm the
type of signal at ANT Input (TV or Cable) and set the
TV or Cable Tuning Mode accordingly. (Refer to Set
Up Feature, Antenna selection.)
NOTE: If =SPEAKER OFF" is displayed On Screen
after pressing the VOLUME button, refer to
Audio Menu to turn Speakers =ON".
_ Selects Next
___
Higher Channel
Selects Next
/
_=€=====T=======_
_
Lower Channel
Option 2.
Press two digits on keyboard (Example press 0,
then 5 for channel 05). For channels over 99, press
three digits on keyboard.
1
I@
@ ®1
I1®
®1
I(D
®
®1
I
L
VCR Function Buttons - TheVCR FUNC-
TION
buttons have been designed to operate numerous
brands of VCRs. The infra-red code must be obtained
priorto use. (Please refer to Programming the Universal
Remote for programming instructions.)
NOTE: The "I'V/AUX/CABLE switch (located on Re-
mote) must be in the AUX position (Center). The
VCR-LDP switch must be in the VCR position.
TV/AUX/CABLE
r-_
VCR
1
POWER
RECORD I
REW
PLAY
FF
_-lr-_
F-_
MOVE
SIZE
PIP
TVNCR
STOP
PAUSE
_E_E
SW_
VCR/LDP
VCR CHANNEL
,
-10-