Optional Equipment Connections; Vcr; Vcr Connection - Panasonic CT-36HX42 Operating Instructions Manual

O E
PTIONAL QUIPMENT

Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only.
.

VCR

VIDEO OUT
AUDIO OUT
ANT OUT ANT IN
Note: The remote control must be programmed with supplied codes to operate the VCR.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
Option A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2 & COMP1, COMP2, etc.)
connected to your VCR.
3. Begin the video.
Option B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view.
6
C
ONNECTIONS
L
R
ANT 1
Incoming
Cable
SPLIT
OUT
ANT 2
CONNECTIONS ON BACK OF THE TV
Y
VIDEO P
B
P
R
L
AUDIO
R
1 2
COMPONENT VIDEO INPUTS
CABLES NOT SUPPLIED
Use either the
S-Video or Video
connection.
S-VIDEO
PROG
OUT
VIDEO
L
R
1 2 3
TO AUDIO
INPUT
AMP