How To Connect The Rgb In Terminals - Panasonic PT-60LCX64B Operating Instructions Manual

Installation

How to connect the RGB IN Terminals

Connecting a PC to RGB IN
RGB OUT
RGB IN Terminal (D-SUB 15P) Pin Layouts
1 1 12 13
6 7 8 9
1 2 3
Connection port view
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to
connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB
15P terminal.
• The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied
with this set.
• The picture will become dark if an PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum picture
quality with the Device Display, a vertical scanning frequency of 60 Hz is recommended.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specifi ed frequency
range.
• Select the desired RGB input position by pressing the TV/VIDEO button. (P. 37)
• Similar connections are available at the RGB IN 1, 2 Terminals.
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
22
COMPUTER
AUDIO OUT
Connect a cable which matches the audio
output terminal on the computer.
PC audio cable
(M3 stereo mini pin)
Conversion adapter
(If necessary)
RGB cable (D-SUB 15P)
Pin No. Signal name
1
14 15
2
10
3
4 5
4
5
6
7
8
NC: Not connected
Pin No. Signal name
R 9
G 10
B 11
NC 12
NC 13
Ground for R 14
Ground for G 15
Ground for B
NC
Ground
NC
NC
HD/CSYNC
VD
NC